Case Studies案例研究 / Latest Case最新案例
Point Piper Estate: Four-Brand Patchwork to One Seamless Mesh
Point Piper豪宅：从四品牌拼凑网络到一张无缝Mesh
Point Piper NSWPoint Piper NSWTelstra + 4-brand legacy gearTelstra+四品牌旧设备Sonos · B&O · Audio ProSonos · B&O · Audio Pro4-node Deco mesh4节点Deco组网July 20262026年7月
A prestige Point Piper home had accumulated a decade of networking gear: a Telstra Smart Modem, a Synology WRX560, NetComm powerline adapters and a legacy Apple AirPort — four brands, several overlapping WiFi networks, and high-end audio that kept falling silent.
Point Piper一栋高端住宅，攒了十来年的网络设备：Telstra Smart Modem、群晖WRX560、NetComm电力猫、再加一台老掉牙的Apple AirPort——四个品牌、好几张互相重叠的WiFi网络，以及动不动就掉线沉默的高端音响系统。
The problem: a "four-brand patchwork"
问题：一张"四品牌拼凑网"
Each device had been added over the years to patch a coverage hole, and each broadcast its own network. The result: double NAT behind multiple routers, channel interference between overlapping signals, and devices constantly hopping networks. The most painful symptom was the smart audio — Sonos, Bang & Olufsen and Audio Pro speakers scattered through the house would drop off mid-play or refuse to appear in their apps at all.
每台设备都是当年为了补某个信号盲区加上去的，而且各自广播自己的WiFi。结果就是：多台路由器叠出双重NAT、重叠信号互相抢信道、设备在几张网络之间来回跳。最折磨人的症状在智能音响上——散布全屋的Sonos、Bang & Olufsen和Audio Pro音箱，播着播着就掉线，或者干脆在App里找不到。
What we did
我们做了什么
- Procurement & pre-staging: sourced a 4-pack TP-Link Deco AX3000 and pre-configured the whole mesh off-site, so the on-site cutover would disrupt the household as little as possible.
- Site survey: walked the property, tested signal attenuation room by room and planned the node topology around the building's structure.
- Deployment: installed the 4 Deco nodes, retired the overlapping legacy networks, and eliminated the double-NAT chain behind the Telstra modem.
- Device integration: re-connected the whole smart-home fleet to the new unified network — three brands of smart speakers, the smart TV, printers and more.
- Optimisation: tuned channels and verified seamless roaming through every zone of the property.
- 采购与预配置：采购TP-Link Deco AX3000四只装，提前在场外完成整套Mesh配置，把上门切换对这家人生活的打扰压到最低。
- 现场勘测：逐房间实测信号衰减，结合建筑结构规划节点拓扑。
- 部署实施：安装4个Deco节点，退役所有互相重叠的旧网络，消除Telstra光猫后面的双重NAT链路。
- 设备接入：把全屋智能设备重新接入统一网络——三个品牌的智能音箱、智能电视、打印机等。
- 调优验证：信道调优，并逐区域验证全屋无缝漫游。
Why pre-staging matters
为什么"预配置"很关键
In an occupied family home — especially a large one — hours of on-site trial and error is itself a cost. Configuring the mesh in advance turned installation day into mostly physical placement and verification, not experimentation.
在有人正常生活的大宅里，技术人员现场折腾几个小时本身就是一种成本。把Mesh提前配置好，上门当天要做的就主要是摆放、接线和验证，而不是现场试错。
Result最终结果
One unified network across the estate: no more double NAT, every speaker back online, seamless roaming room to room.
全屋一张统一网络：双重NAT消失，每一只音箱重新在线，房间之间无缝漫游。