Full bars in the living room, nothing in the back bedroom? Video calls that drop the moment you walk down the hall? We map your dead zones on-site and fix them properly — from a single well-placed access point to a whole-home Mesh network.
We walk the property with real signal measurements — not guesswork — to find exactly where and why coverage drops off.
Often the fix is free: moving the router out of a cupboard, switching to a clean 5GHz channel, and separating congested bands in a dense building.
When one router can't cover the space, we design and install a Mesh system or wired access points sized to your actual floor plan.
Thick walls and multiple floors are the classic Sydney apartment problem — we know where signal dies and how to route around it.
Tell us your floor plan and where the signal dies — back bedroom, studio, garage, whole second floor.
On-site, we measure coverage room by room and identify whether it's placement, interference or a hardware limit.
We fix placement and settings first (often enough), and only recommend Mesh or extra hardware when it's genuinely needed.
We re-test every room and hand over a network that works everywhere you actually use it.
WiFi coverage visits start at $150. Where a simple re-position or channel change solves it, that's all you pay — we don't upsell Mesh hardware you don't need. If it does need extra equipment, we quote clearly before doing anything.
Three-storey house with dead upstairs bedrooms, solved with a wired-backhaul Mesh design.
Read case →Large waterfront property with outdoor coverage needs and thick sandstone walls.
Read case →End-to-end redesign of a premium home network for reliable coverage everywhere.
Read case →Start with router placement and band settings; if walls are thick, a Mesh node or wired access point in the dead zone is the reliable fix. Full guide linked.
Full guide →It depends on your floor plan and whether you can run an Ethernet backhaul. We compare the main options for Sydney apartments and houses.
Full guide →Common causes are channel congestion, an overheating router, or a band-steering conflict. The linked guide walks through each.
Full guide →Rated 5.0 from 100+ verified Google reviews
Call or message us — most replies come within minutes, day or night.
Call 0420 119 140 Contact UsWeak signal points to distance, walls or placement. Slow WiFi beside the router may indicate radio congestion, device limits or router capacity. A dead zone may need a new access-point position. We compare near-router, problem-room and Ethernet results before recommending mesh, a WiFi access point or any plan upgrade.