Moving into a new place, upgrading a struggling network, or starting from a bare wall socket? We install and configure complete home WiFi — router placement, mesh systems, access points and every device connected — tested room by room before we leave.
Router unboxed, positioned and configured from scratch: WiFi name and password, security settings, guest network, and every phone, laptop and TV connected and verified.
Whole-home mesh systems (TP-Link Deco, ASUS, eero and more) or wired access points for larger homes — planned around your floor plan, not guesswork.
High-density buildings need channel planning to dodge 40 neighbouring networks. We also set up fair-sharing QoS so one housemate's downloads don't sink everyone else.
Where walls kill the signal, we design wired backhaul over existing Ethernet. In-wall or lead-in cabling work is carried out with our partnered ACMA-registered cablers.
A WiFi install is more than plugging in a router. Placement decides everything: a router jammed in the weak-current box behind a metal door loses half its signal before it reaches the hallway. We survey your rooms, measure signal with professional tools, and put the hardware where physics — not the closest power point — says it should go.
We install what suits your home, not what earns the biggest markup. A one-bedroom apartment rarely needs a $700 mesh kit; a three-storey terrace almost always does. Because we've completed 750+ jobs across Sydney since early 2025, we can usually tell you what your building needs before we even arrive.
Everything is handed over working and explained in plain English or Chinese: what each box does, how to reboot it, and what to check before calling anyone. You keep the admin passwords — it's your network.
Message us your address type (apartment / house / share house), rough floor plan and what you want covered — we quote before we come.
We arrive same-day where possible, survey the space and confirm the plan and price with you before touching anything.
Hardware installed and configured: router, mesh nodes or APs, channels planned, all devices connected, printers and smart TVs included.
Room-by-room speed test against your plan, cable tidy-up, and a plain-language handover — in English or Chinese.
Most standard WiFi installations start at $150 including survey, setup and room-by-room testing. Mesh and multi-AP installs are quoted upfront based on your floor plan — you approve the number before work starts. Hardware is billed at retail price with receipts; we don't mark up equipment.
A Randwick two-storey home with a dead upstairs — fixed with a properly planned Deco mesh, zero new cabling.
Read case →A four-brand patchwork network with double NAT, rebuilt into one clean system covering every floor.
Read case →Large multi-zone property brought onto stable whole-property coverage.
Read case →Standard single-router installs start at $150. Mesh or multi-access-point homes are quoted from your floor plan before we start — typically $150–$350 labour depending on size, plus hardware at retail price.
Under ~80㎡ on one level, a well-placed router usually covers it. Multi-storey, double-brick walls or 100㎡+ almost always benefit from mesh. We test on-site and tell you honestly — see the full guide.
Full guide →Yes — most rental installs use no-drill options: mesh over the air, powerline adapters, or existing Ethernet ports. If in-wall cabling is genuinely needed, our partnered ACMA-registered cablers handle it with the owner's approval.
Both. If your NBN isn't active yet we activate and configure it in the same visit — one call covers the whole job, from bare wall socket to every device online.
Full guide →Rated 5.0 from 100+ verified Google reviews
A WiFi technician can configure one router and connect devices. A home network installation goes further: it maps dead zones, plans mesh or access points, considers backhaul, gaming, smart-home and CCTV traffic, then tests the rooms that matter. Choose the scope that matches the property rather than buying hardware first.